Mandala Series

This Mandala stitched on 2 layers of Tear Away Lite pulled a bit too but was "rescuable" with the iron and lots of pulling and tugging. I will do future ones using a machine embroidery hoop to prevent the distortion. I was trying to avoid that as some of the straight radiating lines are bigger than my largest hoop so I would have to move the hoop midway through a straight line and I thought stops and starts might create wiggles in the middle of the lines. I have sandwiched this one with some cotton wadding and am in the process of stitching on some sequins. This first one will be simply stitched in circles so I don't have to think about the design too much and can concentrate on the accuracy of the circles. I have lots of ideas for future ones including spirals and uneven division of the circle - so I don't think developing a series will present any problems.

Mandala

It was just as I feared - the stitching pulled the work into a dome shape. Oh Bother! I thought. Or at least my thoughts were along the lines of Oh Bother :-) I have traced another circular grid onto Tear Away (Lite) and am currently stitching exactly the same design with the same fabric, same threads and same machine settings to see if that improves things. I used 2 layers of the Tear Away as I thought one layer might not be sufficient. I have stitched approximately 1/3 of the radiating lines so far and have a sneaking suspicion that this is going to pull in a bit too. I think it is a function of the radiating lines - ie proportionally there is more stitching per fabric area at the centre of the design compared to the outer ring. If this sample pulls significantly into a dome shape then I think the only solution will be to use a hoop when machine stitching this design. So I am prepared for the fact that I might have to stitch a 3rd sample before I get a satisfactory result.

Mandala Series

I have decided to create a series of Mandala. I need to think about where I'm going and what I'm doing as a textile artist so I thought a Mandala series might help as I meditate on this. I started the first one today. First I used CorelDraw to create a semicircular grid so that it fit on A3 paper. I printed 2 copies and taped them together to get the full circle. I traced the grid onto lightweight interfacing and pinned it to the back of the fabric. I stitched all the lines using a thread to match the fabric so that I could see the whole grid from the front. I have started to couch some metallic thread on the radiating straight lines from the front using a narrow zigzag stitch. I am a little worried that this circular quilt will become dome-shaped as I stitch but we shall see what happens.

WAQA Friendship Day (Maddington)

Lizard of Oz http://www.lizardofoz.com.au/ was invited to be one of the shops at the WAQA Friendship Day held at the community centre in Yule St, Maddington last Saturday. This was an easy "appearance" as the car was still packed with all my goodies from the Hexagon Club Christmas in July meeting the day before. The other shops at the WAQA Friendship Day were Calico & Ivy http://www.calicoandivy.com/ (recently taken over by Debbie) and Kraft Daze http://www.kraftdaze.com/ owned by Jenny. There was a good turnout and I think the feedback was such that WAQA will hold perhaps 3 or 4 of these per year. The hall was great - plenty of space and quite light. There is a raised stage so it was easy to see all the Show & Tell. I didn't think about taking photos until late in the day when I suddenly remembered I had my camera with me. This is a photo of Rae with the quilt she made for her son about his desert adventures. Rae used Lizard of Oz Fusables for the geckos. As far as I can tell the difference between lizards and geckos is that lizards have toenails and geckos have rounded "sticky" toes. There was also a wonderful hexagon quilt by a lady who was an "original" (one of a group that started the WAQA many years ago) but she'd gone before I remembered my camera was in my bag.

Hexagon Club Christmas in July

The Hexagon Club invited me to bring my goodies along to their Christmas in July party last Friday. They had also invited the Mandurah group to join them for the day so there was a great crowd - so many they met in the main hall instead of the usual meeting room. There was a huge spread of food for Christmas lunch complete with little "puddings" covered in chocolate - yum - and Christmas crackers (bonbons). They kept me busy with my "shop" and I was a bit late remembering that I had actually got my camera with me so I didn't take many photos. This is Norma (not that you can see her!) with her Supernova table runner.

Field of Diamonds Progress

I had the chance to add quite a bit to this at the weekend. These are 3/4" hexagons. There are 59 red diamonds in my drawing so I only have 45 more to add on!

Voile Scarves Update

The light on these photos is really strange - I rushed outside to take a photo inbetween stormy showers so the sky was looming really dark. I grabbed them off the line and rushed back indoors just in the nick of time!

This top fabric has been randomly scrunched with elastic bands and dyed with Magenta, then rescrunched and dyed with Navy. The Magenta was too bright and pink for my liking so I overdyed the whole thing with a weak solution of Violet in an attempt to make the pink and blue become more purple overall.

This second fabric was folded in half across the width and then rolled diagonally over a cord which was pulled tight and tied into a ring. First dyed in Magenta and then retied and dyed in Navy. I also put this in the weak Violet dyebath as I didn't like the stark white areas. I do like the symmetrical pattern.

This third fabric was folded in half along the length and then twisted until it curled onto itself and looked like a skein. Magenta first, refolded and Navy added. Then undone and weak Violet added.

I may put a weak Navy or Cobalt Blue wash over all three. I have been making some stamps and may stamp over them as well. I haven't decided yet.

Customer blog referral

Boy it sure feels good when you stumble over a great referral about your products from a customer. I'm beginning to think Nicola has made more quilts from my shapes that I have! Check out the March 27 entry for http://harmanyquilting.blogspot.com/

This is a photo of work in progress on a challenge at the Designing Women group I belong to. We all have the same size stretched canvas and have to produce a work which portrays what Piney Lakes means to us. To me, that Saturday meeting once a month is about thinking outside the square. I dyed the organza at a workshop and used it to make the squares on the painted background. I have stitched them down with invisible thread. Now they are attached I will do more embroidery. This is to be finished for our exhibition later this year.

Voile Scarves

I hemmed 5 pieces of cotton voile 2m long x width of fabric to turning them into scarves. I experimented with different hems. Then I experimented with ways of scrunching the fabric to form a resist to the dye on 3 of them. These 3 had a first dye bath of Magenta. I'm not sure I like Magenta - it's too much of a pink-red for my liking. I always planned to overdye them anyway. I had time to put one of them in the navy dyebath. This one was just scrunched and held together with elastic bands. I quite like it but I plan to overdye this in a weak solution of Violet to tone down the pinkness and make the navy more purplish. I hope :-) Depending on what happens with that will affect what I do with the 2 still soaking.

Field of Diamonds Progress

I have been steadily adding to the pile of red diamonds made from 9x three quarter inch hexagons. To make a quilt approximately 34" x 44" I am going to need 59 red diamonds and about 500 cream hexagons for the paths between them. So far I have made 35 diamonds so I need to make another 24. For these photos I laid them out with some cream hexagons in between to give an idea of what the layout "Field of Diamonds" will look like once it's put together.

Workshop with Seiji Konishi

Mr Seiji Konishi from Japan ran a one day workshop at the Atwell Art Centre Gallery (Western Australia) organised by WAFTA. Mr Konishi is a master weaver and sculptural basket maker teaching at the Kawashima Textile School in Kyoto, Japan. Mr Konishi supplied raffia and explained some construction techniques for coiling. It was a relaxing day with most students soon picking up the basics and then exploring what they could do with this simple natural material. Student works ranged from traditional-looking mini baskets to sculptural "playthings" which just invited the viewer to touch and rearrange them. I think most of us were thinking at some time during the day about what we could do with this technique using fabric and thread. Here are some photos of the student achievements made by the end of the day - mine is the one on a water bottle. It only goes half way up because that was as far as I got by the end of the day and I had to learn how to finish off!

Empty Ironing Basket

This is to prove I finished the ironing on 2 April 08.

Twenty four hours later they were full again!

Queen of the May is Bound

I have put the binding, sleeve and label on Queen of the May. I took some close ups of the quilting done by Nicola.

Queen of the May is quilted

Queen of the May is back from long-arm quilter extraordinairre Nicola Harman of Harmany Quilting in Boddington, Western Australia. I am really pleased with how this has turned out and would recommend Nicola to anyone. I will be spending the rest of this afternoon working on the binding and sleeve. I have just worked out that I have enough of the red to bind it (I think - it is going to be very close.) Here are some photos of the quilt prior to binding.

Inchie Challenge

The Designing Women challenge was to produce something that would display our inchies from the swap at our retreat. There were 13 inchie swap participants and this is the set I received.

I didn't meet the deadline but I wasn't alone - only 4 of us had challenge pieces finished. Helen had created a great cuff (in 10 minutes she claimed!) which appealed to everyone. I had thought I would make a necklet but, after seeing the cuff, I decided to make a bracelet. Joan had framed hers in a spiral layout, Delys had made a cube with inchies on each face (which meant she had to add some ring-ins as she 4 on each side - a total of 16), and someone? had made a needle case and appliqued the inchies to the cover.

I wrapped a ring from a Vegemite (Aussie staple diet item) jar with acrylic yarn and then stitched with bright coloured cottons all over it. This was to hide the big stitches I just knew I was going to make when attaching the inchies.

Pink Crochet Top Finished

This is me wearing the pink crochet top. It's beautifully cool to wear as it is very fine cotton. I think I might add a few more flowers - although most of my friends seem to think it is finished as is.

I have 20 rows to go for the sleeve on the Splendid Wren coloured top and then it will be ready to assemble.

This is what happens...

When I can't sleep! My mind goes round and round thinking about HOW to make something. We have a Christmas decoration swap coming up. I'm trying to use these decorations as an opportunity to try techniques I've heard about but never done. I've seen beads made by wrapping fabric/yarn scraps around lengths of drinking straw. I thought they might look good as a 3-D decoration but wanted to be sure I could actually construct it before I made heaps of beads. So at 3am I got out of bed, cut up some drinking straws into 2.5cm and 5cm lengths and created these by threading yarn through. I found I needed a doll needle for the longer straws and that I needed to go through the beads several times in different directions to get a good tension throughout. I think these have definite potential so now I need to make the beads themselves.

Christmas Decorations

One of the groups I attend is having a Christmas Decoration swap at their next meeting so I've been playing with creating some decorations using techniques I've read about but never actually done. This star was created by painting Vliesofix fusible web with gold paint, letting it dry and then ironing the webbing to felt. I stitched a wonky grid with a variegated red rayon thread. I cut out the star shapes and zigzag stitched the edges together. I added the stuffing just before I completed the stitching around the edges while it was still under the presser foot of the machine. I've cut out 2 more and will stitch those by hand so I'll have a total of 3 different decorations from the one piece of embellished felt. I think I put a bit too much paint on the Vliesofix as it didn't adhere very well to the felt and would have looked better with a "worn" look. I am pleased with it overall though and the surface feels very like leather.

Pam Annesley Workshop

Here are my results from the workshop at the weekend with Pam Annesley hosted by the Designing Women group. Pam is a textile and polymer clay artist here in Perth and I've put her website into my links section.
Pam showed us how to layer paper images (pics from mags, wrapping paper, sweet wrappers etc) onto a base fabric with PVA glue and then use tissue paper and paint to fill-in gaps and/or go over the images. I liked the effect of the painting over tissue paper more so I omitted the images bit :-) There are several coats of PVA glue on the top and the resulting fabric/paper is apparently strong enough to make bags and/or boxes. Some ladies went on to stitch their first sheet into one of the designs Pam provided a pattern for. I decided to create a 2nd sheet instead and will do the stitching at home where I have all my threads handy.


I'm thinking I might turn one of them into a wine bottle carrier and depending on the success (or otherwise) of that will decide the fate of the other one.