I made these 2 stamps over the last few days. I found some wood scraps, sanded them smooth and varnished them. I gave them 2 coats of varnish with a day between to dry. I stuck some foam shapes onto them, making sure that I picked shapes that were similar in thickness. I gave that a day to dry too. Then I made a test print and while the stamp was still on the paper I drew around the block of wood on the paper. I later cut this print out on the line and stuck it on the top of the stamp, so that I will know where the foam shapes will print on my fabric. Today I will sand the edges of the block/paper and then I will varnish over the paper print to seal it.